In the interest of fostering an open and welcoming environment, we as contributors and maintainers pledge to making participation in our project and our community a harassment-free experience for everyone.
## Our Standards
Examples of behavior that contributes to creating a positive environment include:
* Using welcoming and inclusive language
* Being respectful of differing viewpoints and experiences
* Gracefully accepting constructive criticism
* Focusing on what is best for the community
* Showing empathy towards other community members
Examples of unacceptable behavior by participants include:
* The use of sexualized language or imagery and unwelcome sexual attention or advances
* Trolling, insulting/derogatory comments, and personal or political attacks
* Public or private harassment
* Publishing others' private information, such as a physical or electronic address, without explicit permission
* Other conduct which could reasonably be considered inappropriate in a professional setting
## Our Responsibilities
Project maintainers are responsible for clarifying the standards of acceptable behavior and are expected to take appropriate and fair corrective action in response to any instances of unacceptable behavior.
Project maintainers have the right and responsibility to remove, edit, or reject comments, commits, code, wiki edits, issues, and other contributions that are not aligned to this Code of Conduct, or to ban temporarily or permanently any contributor for other behaviors that they deem inappropriate, threatening, offensive, or harmful.
## Scope
This Code of Conduct applies both within project spaces and in public spaces when an individual is representing the project or its community. Examples of representing a project or community include using an official project e-mail address, posting via an official social media account, or acting as an appointed representative at an online or offline event. Representation of a project may be further defined and clarified by project maintainers.
## Enforcement
Instances of abusive, harassing, or otherwise unacceptable behavior may be reported by contacting the project team at bhilburn@gmail.com. The project team will review and investigate all complaints, and will respond in a way that it deems appropriate to the circumstances. The project team is obligated to maintain confidentiality with regard to the reporter of an incident. Further details of specific enforcement policies may be posted separately.
Project maintainers who do not follow or enforce the Code of Conduct in good faith may face temporary or permanent repercussions as determined by other members of the project's leadership.
## Attribution
This Code of Conduct is adapted from the [Contributor Covenant][homepage], version 1.4, available at [http://contributor-covenant.org/version/1/4][version]
[](https://gitter.im/bhilburn/powerlevel9k?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge)
Powerlevel9k is a theme for ZSH which uses [Powerline
@ -92,15 +92,18 @@ The segments that are currently available are:
* `dir_writable` - Displays a lock icon, if you do not have write permissions on the current folder.
* [`disk_usage`](#disk_usage) - Disk usage of your current partition.
* `history` - The command number for the current line.
* [`host`](#host) - Your current host name
* [`ip`](#ip) - Shows the current IP address.
* [`vpn_ip`](#vpn_ip) - Shows the current VPN IP address.
* [`public_ip`](#public_ip) - Shows your public IP address.
* `load` - Your machine's load averages.
* [`load`](#load) - Your machine's load averages.
* `os_icon` - Display a nice little icon, depending on your operating system.
* `ram` - Show free RAM.
* `root_indicator` - An indicator if the user has superuser status.
* [`status`](#status) - The return code of the previous command.
* `swap` - Prints the current swap size.
* [`time`](#time) - System time.
* [`user`](#user) - Your current username
* [`vi_mode`](#vi_mode)- Your prompt's Vi editing mode (NORMAL|INSERT).
* `ssh` - Indicates whether or not you are in an SSH session.
@ -126,6 +129,7 @@ The segments that are currently available are:
* [`chruby`](#chruby) - Ruby environment information using `chruby` (if one is active).
* [`rbenv`](#rbenv) - Ruby environment information using `rbenv` (if one is active).
* [`rspec_stats`](#rspec_stats) - Show a ratio of test classes vs code classes for RSpec.
* `rvm` - Ruby environment information using `$GEM_HOME` and `$MY_RUBY_HOME` (if one is active).
* **Rust Segments:**
* `rust_version` - Display the current rust version and [logo](https://www.rust-lang.org/logos/rust-logo-blk.svg).
* **Swift Segments:**
@ -136,6 +140,7 @@ The segments that are currently available are:
* [`aws`](#aws) - The current AWS profile, if active.
* `aws_eb_env` - The current Elastic Beanstalk Environment.
* `docker_machine` - The current Docker Machine.
* `kubecontext` - The current context of your `kubectl` configuration.
**Other:**
* [`custom_command`](#custom_command) - Create a custom segment to display the
@ -143,6 +148,7 @@ The segments that are currently available are:
* [`command_execution_time`](#command_execution_time) - Display the time the current command took to execute.
* [`todo`](http://todotxt.com/) - Shows the number of tasks in your todo.txt tasks file.
* `detect_virt` - Virtualization detection with systemd
This segment shows the version of Ruby being used when using `chruby` to change your current Ruby stack.
@ -272,13 +331,13 @@ elements (it is by default), and define a `DEFAULT_USER` in your `~/.zshrc`.
You can customize the `context` segment. For example, you can make it to print the
full hostname by setting
```
POWERLEVEL9K_CONTEXT_TEMPLATE="%n@`hostname -f`"
```
You can set the `POWERLEVEL9K_CONTEXT_HOST_DEPTH` variable to change how the
hostname is displayed. See (ZSH Manual)[http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Login-information]
hostname is displayed. See [ZSH Manual](http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Login-information)
for details. The default is set to %m which will show the hostname up to the first ‘.’
You can set it to %{N}m where N is an integer to show that many segments of system
hostname. Setting N to a negative integer will show that many segments from the
@ -320,10 +379,11 @@ Customizations available are:
| Strategy Name | Description |
|---------------|-------------|
|Default|Truncate whole directories from left. How many is defined by `POWERLEVEL9K_SHORTEN_DIR_LENGTH`|
|`truncate_middle`|Truncates the middle part of a folder. E.g. you are in a folder named "~/MySuperProjects/AwesomeFiles/BoringOffice", then it will truncated to "~/MyS..cts/Awe..les/BoringOffice", if `POWERLEVEL9K_SHORTEN_DIR_LENGTH=3` is also set (controls the amount of characters to be left).|
|`truncate_middle`|Truncates the middle part of a folder. E.g. you are in a folder named `~/MySuperProjects/AwesomeFiles/BoringOffice`, then it will truncated to `~/MyS..cts/Awe..les/BoringOffice`, if `POWERLEVEL9K_SHORTEN_DIR_LENGTH=3` is also set (controls the amount of characters to be left).|
|`truncate_from_right`|Just leaves the beginning of a folder name untouched. E.g. your folders will be truncated like so: "/ro../Pr../office". How many characters will be untouched is controlled by `POWERLEVEL9K_SHORTEN_DIR_LENGTH`.|
|`truncate_with_package_name`|Search for a `package.json` or `composer.json` and prints the `name` field to abbreviate the directory path. The precedence and/or files could be set by `POWERLEVEL9K_DIR_PACKAGE_FILES=(package.json composer.json)`. If you have [jq](https://stedolan.github.io/jq/) installed, it will dramatically improve the speed of this strategy.|
|`truncate_with_folder_marker`|Search for a file that is specified by `POWERLEVEL9K_SHORTEN_FOLDER_MARKER` and truncate everything before that (if found, otherwise stop on $HOME and ROOT).|
|`truncate_to_unique`|Parse all parent path components and truncate them to the shortest unique length. If you copy & paste the result to a shell, after hitting `TAB` it should expand to the original path unambiguously.|
For example, if you wanted the truncation behavior of the `fish` shell, which
truncates `/usr/share/plasma` to `/u/s/plasma`, you would use the following:
@ -359,7 +419,11 @@ You can also customize the leading tilde character when you are in `$HOME` using
You can also configure the `dir` segment to show when you are in a directory without write permissions, using the variable below.
| Variable | Default Value | Description |
|----------|---------------|-------------|
|`POWERLEVEL9K_DIR_SHOW_WRITABLE`|`false`|If set to `true` and you are in a directory that you do not have write permissions for, this segment will display a lock icon and enter the `NOT_WRITABLE` state (which can be customized per [our usual process](https://github.com/bhilburn/powerlevel9k/wiki/Stylizing-Your-Prompt#segment-color-customization)). Note that this functionality is also available in a separate segment, `dir_writable`.|
##### disk_usage
@ -371,6 +435,28 @@ The `disk_usage` segment will show the usage level of the partition that your cu
|POWERLEVEL9K_DISK_USAGE_WARNING_LEVEL|90|The usage level that triggers a warning state.|
|POWERLEVEL9K_DISK_USAGE_CRITICAL_LEVEL|95|The usage level that triggers a critical state.|
##### host
The `host` segment will print the hostname.
You can set the `POWERLEVEL9K_HOST_TEMPLATE` variable to change how the hostname
is displayed. See (ZSH Manual)[http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html#Login-information]
for details. The default is set to `%m` which will show the hostname up to the
first `.`. You can set it to `%{N}m` where N is an integer to show that many
segments of system hostname. Setting `N` to a negative integer will show that many
segments from the end of the hostname.
```
POWERLEVEL9K_HOST_TEMPLATE="%2m"
```
By default, LOCAL hosts will show the host icon and remote hosts will show the SSH icon. You can override them by setting
```
POWERLEVEL9K_HOST_ICON="\uF109 "
POWERLEVEL9K_SSH_ICON="\uF489 "
```
##### ip
This segment tries to examine all currently used network interfaces and prints
@ -381,6 +467,14 @@ specify the correct network interface by setting:
|----------|---------------|-------------|
|`POWERLEVEL9K_IP_INTERFACE`|None|The NIC for which you wish to display the IP address. Example: `eth0`.|
##### vpn_ip
This segment tries to extract the VPN related IP addresses from nmcli, based on the NIC type:
This segment will display your public IP address. There are several methods of obtaining this
@ -404,6 +498,26 @@ segment will not be displayed.
|`POWERLEVEL9K_PUBLIC_IP_METHODS`|(dig curl wget)| These methods in that order are used to refresh your IP.|
|`POWERLEVEL9K_PUBLIC_IP_NONE`|None|The string displayed when an IP was not obtained|
##### load
Displays one of your load averages with appropriate state coloring. The thresholds are:
- `0.7 * NUM_CORES <`: critical
- `0.5 * NUM_CORES <`: warning
- `less`: normal
| Variable | Default Value | Description |
|----------|---------------|-------------|
|`POWERLEVEL9K_LOAD_WHICH`|5|Which average to show. Possible values: 1, 5 or 15|
##### newline
Puts a newline in your prompt so you can continue using segments on the next
line. This allows you to use segments on both lines, unlike
`POWERLEVEL9K_PROMPT_ON_NEWLINE`, which simply separates segments from the
prompt itself.
This only works on the left side. On the right side it does nothing.
##### rbenv
This segment shows the version of Ruby being used when using `rbenv` to change your current Ruby stack.
@ -413,6 +527,10 @@ It figures out the version being used by taking the output of the `rbenv version
* If `rbenv` is not in $PATH, nothing will be shown.
* If the current Ruby version is the same as the global Ruby version, nothing will be shown.
| Variable | Default Value | Description |
|----------|---------------|-------------|
|`POWERLEVEL9K_RBENV_PROMPT_ALWAYS_SHOW`|`false`|Set to true if you wish to show the rbenv segment even if the current Ruby version is the same as the global Ruby version|
##### rspec_stats
See [Unit Test Ratios](#unit-test-ratios), below.
@ -423,8 +541,10 @@ This segment shows the return code of the last command.
| Variable | Default Value | Description |
|----------|---------------|-------------|
|`POWERLEVEL9K_STATUS_VERBOSE`|`true`|Set to false if you wish to not show the error code when the last command returned an error and optionally hide this segment when the last command completed successfully by setting `POWERLEVEL9K_STATUS_OK_IN_NON_VERBOSE` to false.|
|`POWERLEVEL9K_STATUS_OK_IN_NON_VERBOSE`|`false`|Set to true if you wish to show this segment when the last command completed successfully in non-verbose mode.|
|`POWERLEVEL9K_STATUS_CROSS`|`false`|Set to true if you wish not to show the error code when the last command returned an error and optionally hide this segment when the last command completed successfully by setting `POWERLEVEL9K_STATUS_OK` to false.|
|`POWERLEVEL9K_STATUS_OK`|`true`|Set to true if you wish to show this segment when the last command completed successfully, false to hide it.|
|`POWERLEVEL9K_STATUS_SHOW_PIPESTATUS`|`true`|Set to true if you wish to show the exit status for all piped commands.|
|`POWERLEVEL9K_STATUS_HIDE_SIGNAME`|`false`|Set to true return the raw exit code (`1-255`). When set to false, values over 128 are shown as `SIGNAME(-n)` (e.g. `KILL(-9)`)|
##### ram
@ -453,6 +573,23 @@ segment, as well:
# Output time, date, and a symbol from the "Awesome Powerline Font" set
|`DEFAULT_USER`|None|Username to consider a "default context".|
|`POWERLEVEL9K_ALWAYS_SHOW_USER`|`false`|Always print this segment.|
|`POWERLEVEL9K_USER_TEMPLATE`|`%n`|Default username prompt. Refer to the [ZSH Documentation](http://zsh.sourceforge.net/Doc/Release/Prompt-Expansion.html) for all possible expansions|
##### vcs
By default, the `vcs` segment will provide quite a bit of information. Further
@ -465,6 +602,10 @@ customization is provided via:
|`POWERLEVEL9K_CHANGESET_HASH_LENGTH`|`12`|How many characters of the hash / changeset to display in the segment.|
|`POWERLEVEL9K_VCS_SHOW_SUBMODULE_DIRTY`|`true`|Set to `false` to not reflect submodule status in the top-level repository prompt.|
|`POWERLEVEL9K_VCS_HIDE_TAGS`|`false`|Set to `true` to stop tags being displayed in the segment.|
|`POWERLEVEL9K_VCS_GIT_HOOKS`|`(vcs-detect-changes git-untracked git-aheadbehind git-stash git-remotebranch git-tagname)`|Layout of the segment for git repositories.|
|`POWERLEVEL9K_VCS_HG_HOOKS`|`(vcs-detect-changes)`|Layout of the segment for Mercurial repositories.|
|`POWERLEVEL9K_VCS_SVN_HOOKS`|`(vcs-detect-changes svn-detect-changes)`|Layout of the segment for SVN repositories.|
|`POWERLEVEL9K_VCS_ACTIONFORMAT_FOREGROUND`|`red`|The color of the foreground font during actions (e.g., `REBASE`).|
##### vcs symbols
@ -509,6 +650,21 @@ is count your source files and test files, and calculate the ratio between them.
Just enough to give you a quick overview about the test situation of the project
you are dealing with.
### Disabling / Enabling Powerlevel9k
You can disable P9k and return to a very basic prompt at any time simply by
calling:
```zsh
$ prompt_powerlevel9k_teardown
```
You can then re-enable it by calling:
```zsh
$ prompt_powerlevel9k_setup
```
### tl; dr
Want to just get a quick start? Check out the [Show Off Your
if [[ "$POWERLEVEL9K_RPROMPT_ON_NEWLINE" != true ]]; then
# The right prompt should be on the same line as the first line of the left
# prompt. To do so, there is just a quite ugly workaround: Before zsh draws
@ -1343,28 +1544,28 @@ NEWLINE='
}
prompt_powerlevel9k_setup() {
# I decided to use the value below for better supporting 32-bit CPUs, since the previous value "99999999999" was causing issues on my Android phone, which is powered by an armv7l
# We don't have to change that until 19 January of 2038! :)
# The value below was set to better support 32-bit CPUs.
# It's the maximum _signed_ integer value on 32-bit CPUs.
# Please don't change it until 19 January of 2038. ;)
# Disable false display of command execution time
# Maximum integer on 32-bit CPUs
_P9K_TIMER_START=2147483647
_P9K_TIMER_START=0x7FFFFFFF
# The prompt function will set these prompt_* options after the setup function
# returns. We need prompt_subst so we can safely run commands in the prompt
# without them being double expanded and we need prompt_percent to expand the
# common percent escape sequences.
prompt_opts=(subst percent cr)
prompt_opts=(cr percent sp subst)
# Borrowed from promptinit, sets the prompt options in case the theme was
Dan
6 years ago
committed by
GitHub