@ -104,17 +104,17 @@ To customize prompt, edit `~/.p10k.zsh`. Powerlevel10k doesn't recognize Pure co
parameters, so you need to use `POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=3` instead of
parameters, so you need to use `POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=3` instead of
`PURE_CMD_MAX_EXEC_TIME=3` , etc. All relevant parameters are in the config.`PURE_CMD_MAX_EXEC_TIME=3` , etc. All relevant parameters are in the config.
### Instant prompt
### < a name = 'what-is-instant-prompt' > < / a >
If your `~/.zshrc` loads many plugins, or perhaps just a few slow ones (pyenv and nvm are the usual
If your `~/.zshrc` loads many plugins, or perhaps just a few slow ones (pyenv and nvm are the usual
suspects), you may have noticed that it takes some time for Zsh to start.
suspects), you may have noticed that it takes some time for Zsh to start.
https://raw.githubusercontent.com/romkatv/powerlevel10k-media/master/no-instant-prompt.gif)
Powerlevel10k can remove Zsh startup lag *even if it's not caused by a theme* .
Powerlevel10k can remove Zsh startup lag *even if it's not caused by a theme* .
https://raw.githubusercontent.com/romkatv/powerlevel10k-media/master/instant-prompt.gif)
This feature is called *Instant Prompt* . You need to explicitly enable it through `p10k configure`
This feature is called *Instant Prompt* . You need to explicitly enable it through `p10k configure`
@ -124,7 +124,7 @@ upon Zsh startup allowing you to start typing while plugins are still loading.
Other themes *increase* Zsh startup lag -- some by a lot, others by a just a little. Powerlevel10k
Other themes *increase* Zsh startup lag -- some by a lot, others by a just a little. Powerlevel10k
*removes* it outright.
*removes* it outright.
For details, see [FAQ ](#what-is -instant-prompt).
For caveats and details, see [FAQ ](#how-do-i-enable -instant-prompt).
### Show on command
### Show on command
@ -473,14 +473,12 @@ Powerlevel10k, on the other hand, doesn't require trading latency for utility --
instant with any configuration. It stays well below the 50 ms mark, leaving most of the latency
instant with any configuration. It stays well below the 50 ms mark, leaving most of the latency
budget for other plugins you might install.
budget for other plugins you might install.
### < / a > What is
### How do I enable instant prompt?
*Instant Prompt* is an optional feature of Powerlevel10k. When enabled, it gives you a limited
See [instant prompt ](#instant-prompt ) to learn what instant prompt is. This section explains how
prompt within a few milliseconds of starting zsh, allowing you to start hacking right away while zsh
you can enable it, and caveats that you should be aware of.
is initializing. Once initialization is complete, the full-featured Powerlevel10k prompt will
seamlessly replace instant prompt.
You can enable instant prompt either by running `p10k configure` or by manually adding the followingInstant prompt can be enabled either through `p10k configure` or by manually adding the following
code snippet at the top of `~/.zshrc` :
code snippet at the top of `~/.zshrc` :
```zsh
```zsh
@ -517,6 +515,7 @@ fi
keychain id_rsa --agents ssh # asks for password
keychain id_rsa --agents ssh # asks for password
chatty-script # spams to stdout even when everything is fine
chatty-script # spams to stdout even when everything is fine
# ...
```
```
Fixed version:
Fixed version:
@ -532,6 +531,7 @@ fi
# console output may appear uncolored.
# console output may appear uncolored.
chatty-script >/dev/null # spam output suppressed
chatty-script >/dev/null # spam output suppressed
# ...
```
```
If `POWERLEVEL9K_INSTANT_PROMPT` is unset or set to `verbose` , Powerlevel10k will print a warning
If `POWERLEVEL9K_INSTANT_PROMPT` is unset or set to `verbose` , Powerlevel10k will print a warning
@ -545,125 +545,6 @@ initialization and you don't know how to fix it.
*NOTE: Instant prompt requires zsh >= 5.4. It's OK to enable it even when using an older version of
*NOTE: Instant prompt requires zsh >= 5.4. It's OK to enable it even when using an older version of
zsh but it won't do anything.*
zsh but it won't do anything.*
### Why do my icons and/or powerline symbols look bad?
It's likely your font's fault.
[Install the recommended font ](#recommended-meslo-nerd-font-patched-for-powerlevel10k ) and run
`p10k configure` .
### I'm getting "character not in range" error. What gives?
Type `echo '\u276F'` . If you get an error saying "zsh: character not in range", your locale
doesn't support UTF-8. You need to fix it. If you are running zsh over SSH, see
[this ](https://github.com/romkatv/powerlevel10k/issues/153#issuecomment-518347833 ). If you are
running zsh locally, Google "set UTF-8 locale in *your OS* ".
### Why is my cursor in the wrong place?
Type `echo '\u276F'` . If you get an error saying "zsh: character not in range", see the
[previous question ](#im-getting-character-not-in-range-error-what-gives ).
If the `echo` command prints `❯ but the cursor is still in the wrong place, install
[the recommended font ](#recommended-meslo-nerd-font-patched-for-powerlevel10k ) and run
`p10k configure` .
If this doesn't help, add `unset ZLE_RPROMPT_INDENT` at the bottom of `~/.zshrc` .
Still having issues? Run the following command to diagnose the problem:
```zsh
() {
emulate -L zsh
setopt err_return no_unset
local text
print -rl -- 'Select a part of your prompt from the terminal window and paste it below.' ''
read -r '?Prompt: ' text
local -i len=${(m)#text}
local frame="+-${(pl.$len..-.):-}-+"
print -lr -- $frame "| $text |" $frame
}
```
#### If the prompt line aligns with the frame
```text
+------------------------------+
| romka@adam ✓ ~/powerlevel10k |
+------------------------------+
```
If the output of the command is aligned for every part of your prompt (left and right), this
indicates a bug in the theme or your config. Use this command to diagnose it:
```zsh
print -rl -- ${(eq+)PROMPT} ${(eq+)RPROMPT}
```
Look for `%{...%}` and backslash escapes in the output. If there are any, they are the likely
culprits. Open an issue if you get stuck.
#### If the prompt line is longer than the frame
```text
+-----------------------------+
| romka@adam ✓ ~/powerlevel10k |
+-----------------------------+
```
This is usually caused by a terminal bug or misconfiguration that makes it print ambiguous-width
characters as double-width instead of single width. For example,
[this issue ](https://github.com/romkatv/powerlevel10k/issues/165 ).
#### If the prompt line is shorter than the frame and is mangled
```text
+------------------------------+
| romka@adam ✓~/powerlevel10k |
+------------------------------+
```
Note that this prompt is different from the original as it's missing a space after the checkmark.
This can be caused by a low-level bug in macOS. See
[this issue ](https://github.com/romkatv/powerlevel10k/issues/241 ).
#### If the prompt line is shorter than the frame and is not mangled
```text
+--------------------------------+
| romka@adam ✓ ~/powerlevel10k |
+--------------------------------+
```
This can be caused by misconfigured locale. See
[this issue ](https://github.com/romkatv/powerlevel10k/issues/251 ).
### Why is my prompt wrapping around in a weird way?
See [Why is my cursor in the wrong place? ](#why-is-my-cursor-in-the-wrong-place )
### Why is my right prompt in the wrong place?
See [Why is my cursor in the wrong place? ](#why-is-my-cursor-in-the-wrong-place )
### Why does the configuration wizard run automatically every time I start zsh?
When Powerlevel10k starts, it automatically runs `p10k configure` if no `POWERLEVEL9K_*`
parameters are defined. Based on your prompt style choices, the configuration wizard creates
`~/.p10k.zsh` with a bunch of `POWERLEVEL9K_*` parameters in it and adds a line to `~/.zshrc` to
source this file. The next time you start zsh, the configuration wizard shouldn't run automatically.
If it does, this means the evaluation of `~/.zshrc` terminates prematurely before it reaches the
line that sources `~/.p10k.zsh` . This most often happens due to syntax errors in `~/.zshrc` . These
errors get hidden by the configuration wizard screen, so you don't notice them. Scroll up in the
first configuration wizard screen to see these errors. Alternatively, run
`POWERLEVEL9K_DISABLE_CONFIGURATION_WIZARD=true zsh` to start zsh without automatically running the
configuration wizard. Once you can see the errors, fix `~/.zshrc` to get rid of them.
### I cannot install the recommended font. Help!
Once you download [the recommended font ](#recommended-meslo-nerd-font-patched-for-powerlevel10k ),
you can install it just like any other font. Google "how to install fonts on *your OS* ".
### Why do I have a question mark symbol in my prompt? Is my font broken?
### Why do I have a question mark symbol in my prompt? Is my font broken?
If it looks like a regular `?` , that's normal. It means you have untracked files in the current Git
If it looks like a regular `?` , that's normal. It means you have untracked files in the current Git
@ -796,8 +677,8 @@ for i in {0..255}; do print -Pn "%K{$i} %k%F{$i}${(l:3::0:)i}%f " ${${(M)$((i%8)
Powerlevel10k uses [gitstatus ](https://github.com/romkatv/gitstatus ) as the backend behind `vcs`
Powerlevel10k uses [gitstatus ](https://github.com/romkatv/gitstatus ) as the backend behind `vcs`
prompt; gitstatus spawns `gitstatusd` and `zsh` . See
prompt; gitstatus spawns `gitstatusd` and `zsh` . See
[gitstatus ](https://github.com/romkatv/gitstatus ) for details. Powerlevel10k may also spawn `zsh`
[gitstatus ](https://github.com/romkatv/gitstatus ) for details. Powerlevel10k may also spawn `zsh`
to trigger async prompt refresh . To avoid security hazard, these background processes aren't shared
to perform computation without blocking prompt . To avoid security hazard, these background processes
by different interactive shells.
aren't shared by different interactive shells.
### Are there configuration options that make Powerlevel10k slow?
### Are there configuration options that make Powerlevel10k slow?
@ -824,22 +705,25 @@ times faster than powerlevel9k/master and 17 times faster than powerlevel9k/next
### Does Powerlevel10k always render exactly the same prompt as Powerlevel9k given the same config?
### Does Powerlevel10k always render exactly the same prompt as Powerlevel9k given the same config?
This is the goal. You should be able to switch from Powerlevel9k to Powerlevel10k with no
Almost. There are a few differences.
visible changes except for performance. There are, however, several differences.
- By default only `git` vcs backend is enabled in Powerlevel10k. If you need `svn` and `hg` , you'll
- By default only `git` vcs backend is enabled in Powerlevel10k. If you need `svn` and `hg` , add
need to add them to `POWERLEVEL9K_VCS_BACKENDS` .
them to `POWERLEVEL9K_VCS_BACKENDS` .
- Powerlevel10k strives to be bug-compatible with Powerlevel9k but not when it comes to egregious
- Powerlevel10k strives to be bug-compatible with Powerlevel9k but not when it comes to egregious
bugs. If you accidentally rely on these bugs, your prompt will differ between Powerlevel9k and
bugs. If you accidentally rely on these bugs, your prompt will differ between Powerlevel9k and
Powerlevel10k. Some examples:
Powerlevel10k. Some examples:
- Powerlevel9k doesn't respect `ZLE_RPROMPT_INDENT` . As a result, right prompt in Powerlevel10k
can have an extra space at the end compared to Powerlevel9k. Set `ZLE_RPROMPT_INDENT=0` if you
don't want that space.
- Powerlevel9k ignores some options that are set after the theme is sourced while Powerlevel10k
- Powerlevel9k ignores some options that are set after the theme is sourced while Powerlevel10k
respects all options. If you see different icons in Powerlevel9k and Powerlevel10k, you've
respects all options. If you see different icons in Powerlevel9k and Powerlevel10k, you've
probably defined `POWERLEVEL9K_MODE` before sourcing the theme. This parameter gets ignored
probably defined `POWERLEVEL9K_MODE` before sourcing the theme. This parameter gets ignored
by Powerlevel9k but honored by Powerlevel10k. If you want your prompt to look in Powerlevel10k
by Powerlevel9k but honored by Powerlevel10k. If you want your prompt to look in Powerlevel10k
the same as in Powerlevel9k, remove `POWERLEVEL9K_MODE` .
the same as in Powerlevel9k, remove `POWERLEVEL9K_MODE` .
- Powerlevel9k doesn't respect `ZLE_RPROMPT_INDENT` . As a result, right prompt in Powerlevel10k
can have an extra space at the end compared to Powerlevel9k. Set `ZLE_RPROMPT_INDENT=0` if you
don't want that space. More details in
[troubleshooting ](#extra-space-without-background-on-the-right-side-of-right-prompt ).
- Powerlevel9k has inconsistent spacing around icons. This was fixed in Powerlevel10k. Set
`POWERLEVEL9K_LEGACY_ICON_SPACING=true` to get the same spacing as in Powerlevel9k. More
details in [troubleshooting ](#extra-spaces-after-some-icons ).
- There are
- There are
[dozens more bugs ](https://github.com/Powerlevel9k/powerlevel9k/issues/created_by/romkatv ) in
[dozens more bugs ](https://github.com/Powerlevel9k/powerlevel9k/issues/created_by/romkatv ) in
Powerlevel9k that don't exist in Powerlevel10k.
Powerlevel9k that don't exist in Powerlevel10k.
@ -852,7 +736,192 @@ Powerlevel10k, please [open an issue](https://github.com/romkatv/powerlevel10k/i
Yes, [zsh-theme-powerlevel10k-git ](https://aur.archlinux.org/packages/zsh-theme-powerlevel10k-git/ ).
Yes, [zsh-theme-powerlevel10k-git ](https://aur.archlinux.org/packages/zsh-theme-powerlevel10k-git/ ).
This package is owned by an unaffiliated volunteer.
This package is owned by an unaffiliated volunteer.
### I cannot make Powerlevel10k work with my plugin manager. Help!
### What is the minimum supported zsh version?
Zsh 5.1 or newer should work. Fast startup requires zsh >= 5.4.
### How were these screenshots and animated gifs created?
All screenshots and animated gifs were recorded in GNOME Terminal with
[the recommended font ](#meslo-nerd-font-patched-for-powerlevel10k ) and Tango Dark color scheme with
custom background color (`#171A1B` instead of `#2E3436` -- twice as dark).
## Troubleshooting
### Icons, glyphs or powerline symbols don't render.
Restart your terminal, [install the recommended font](
#recommended -meslo-nerd-font-patched-for-powerlevel10k) and run `p10k configure` .
### zsh: character not in range
Type `echo '\u276F'` . If you get an error saying "zsh: character not in range", your locale
doesn't support UTF-8. You need to fix it. If you are running zsh over SSH, see
[this ](https://github.com/romkatv/powerlevel10k/issues/153#issuecomment-518347833 ). If you are
running zsh locally, Google "set UTF-8 locale in *your OS* ".
### Cursor is in the wrong place
Type `echo '\u276F'` . If you get an error saying "zsh: character not in range", see the
[previous section ](#zsh-character-not-in-range ).
If the `echo` command prints `❯ but the cursor is still in the wrong place, install
[the recommended font ](#recommended-meslo-nerd-font-patched-for-powerlevel10k ) and run
`p10k configure` .
If this doesn't help, add `unset ZLE_RPROMPT_INDENT` at the bottom of `~/.zshrc` .
Still having issues? Run the following command to diagnose the problem:
```zsh
() {
emulate -L zsh
setopt err_return no_unset
local text
print -rl -- 'Select a part of your prompt from the terminal window and paste it below.' ''
read -r '?Prompt: ' text
local -i len=${(m)#text}
local frame="+-${(pl.$len..-.):-}-+"
print -lr -- $frame "| $text |" $frame
}
```
#### If the prompt line aligns with the frame
```text
+------------------------------+
| romka@adam ✓ ~/powerlevel10k |
+------------------------------+
```
If the output of the command is aligned for every part of your prompt (left and right), this
indicates a bug in the theme or your config. Use this command to diagnose it:
```zsh
print -rl -- ${(eq+)PROMPT} ${(eq+)RPROMPT}
```
Look for `%{...%}` and backslash escapes in the output. If there are any, they are the likely
culprits. Open an issue if you get stuck.
#### If the prompt line is longer than the frame
```text
+-----------------------------+
| romka@adam ✓ ~/powerlevel10k |
+-----------------------------+
```
This is usually caused by a terminal bug or misconfiguration that makes it print ambiguous-width
characters as double-width instead of single width. For example,
[this issue ](https://github.com/romkatv/powerlevel10k/issues/165 ).
#### If the prompt line is shorter than the frame and is mangled
```text
+------------------------------+
| romka@adam ✓~/powerlevel10k |
+------------------------------+
```
Note that this prompt is different from the original as it's missing a space after the checkmark.
This can be caused by a low-level bug in macOS. See
[this issue ](https://github.com/romkatv/powerlevel10k/issues/241 ).
#### If the prompt line is shorter than the frame and is not mangled
```text
+--------------------------------+
| romka@adam ✓ ~/powerlevel10k |
+--------------------------------+
```
This can be caused by misconfigured locale. See
[this issue ](https://github.com/romkatv/powerlevel10k/issues/251 ).
### Prompt wrapping around in a weird way
See [cursor is in the wrong place ](#cursor-is-in-the-wrong-place ).
### Right prompt is in the wrong place
See [cursor is in the wrong place ](#cursor-is-in-the-wrong-place ).
### Configuration wizard run automatically every time zsh is started
When Powerlevel10k starts, it automatically runs `p10k configure` if no `POWERLEVEL9K_*`
parameters are defined. Based on your prompt style choices, the configuration wizard creates
`~/.p10k.zsh` with a bunch of `POWERLEVEL9K_*` parameters in it and adds a line to `~/.zshrc` to
source this file. The next time you start zsh, the configuration wizard shouldn't run automatically.
If it does, this means the evaluation of `~/.zshrc` terminates prematurely before it reaches the
line that sources `~/.p10k.zsh` . This most often happens due to syntax errors in `~/.zshrc` . These
errors get hidden by the configuration wizard screen, so you don't notice them. Scroll up in the
first configuration wizard screen to see these errors. Alternatively, run
`POWERLEVEL9K_DISABLE_CONFIGURATION_WIZARD=true zsh` to start zsh without automatically running the
configuration wizard. Once you can see the errors, fix `~/.zshrc` to get rid of them.
### Cannot install the recommended font
Once you download [the recommended font ](#recommended-meslo-nerd-font-patched-for-powerlevel10k ),
you can install it just like any other font. Google "how to install fonts on *your OS* ".
### Extra spaces in prompt compared to Powerlevel9k
When using Powerlevel10k with a Powerlevel9k config, you might get additional spaces in prompt here
and there. These come in two flavors.
#### Extra space without background on the right side of right prompt
tl;dr: Add `ZLE_RPROMPT_INDENT=0` to `~/.zshrc` to get rid of that space.
From [Zsh documentation](
http://zsh.sourceforge.net/Doc/Release/Parameters.html#index-ZLE_005fRPROMPT_005fINDENT):
> `ZLE_RPROMPT_INDENT <S>`
>
> If set, used to give the indentation between the right hand side of the right prompt in the line
> editor as given by `RPS1` or `RPROMPT` and the right hand side of the screen. If not set, the
> value `1` is used.
>
> Typically this will be used to set the value to `0` so that the prompt appears flush with the
> right hand side of the screen.
Powerlevel10k respects this parameter. If you set `ZLE_RPROMPT_INDENT=1` (or leave it unset, which
is the same thing as setting it to `1` ), you'll get an empty space to the right of right prompt. If
you set `ZLE_RPROMPT_INDENT=0` , your prompt will go to the edge of the terminal. This is how it
works in every theme except Powerlevel9k.
Bug against Powerlevel9k: [powerlevel9k#1292](
https://github.com/Powerlevel9k/powerlevel9k/issues/1292). It's been fixed in the development
branch of Powerlevel9k but the fix hasn't yet made it to `master` .
Add `ZLE_RPROMPT_INDENT=0` to `~/.zshrc` to get the same spacing on the right edge of prompt as in
Powerlevel9k.
#### Extra spaces after some icons
tl;dr: Add `POWERLEVEL9K_LEGACY_ICON_SPACING=true` to `~/.zshrc` to get rid of these spaces.
Spacing around icons in Powerlevel9k is inconsistent.
This inconsistency is a constant source of annoyance, so it was fixed in Powerlevel10k.
Unfortunately, this means that users upgrading from Powerlevel9k will notice differences in spacing
around some icons.
Add `POWERLEVEL9K_LEGACY_ICON_SPACING=true` to `~/.zshrc` to get the same spacing around icons as in
Powerlevel9k.
### Cannot make Powerlevel10k work with my plugin manager
If the [installation instructions ](#installation ) didn't work for you, try disabling your current
If the [installation instructions ](#installation ) didn't work for you, try disabling your current
theme (so that you end up with no theme) and then installing Powerlevel10k manually.
theme (so that you end up with no theme) and then installing Powerlevel10k manually.
@ -878,19 +947,6 @@ echo 'source ~/powerlevel10k/powerlevel10k.zsh-theme' >>! ~/.zshrc
This method of installation won't make anything slower or otherwise sub-par.
This method of installation won't make anything slower or otherwise sub-par.
### What is the minimum supported zsh version?
Zsh 5.1 or newer should work. Fast startup requires zsh >= 5.4.
### How were these screenshots and animated gifs created?
All screenshots and animated gifs were recorded in GNOME Terminal with
[the recommended font ](#meslo-nerd-font-patched-for-powerlevel10k ) and Tango Dark color scheme with
custom background color (`#171A1B` instead of `#2E3436` -- twice as dark).
## Table of contents
## Table of contents
1. [Features ](#features )
1. [Features ](#features )
@ -944,6 +1000,7 @@ custom background color (`#171A1B` instead of `#2E3436` -- twice as dark).
1. [Are there configuration options that make Powerlevel10k slow? ](#are-there-configuration-options-that-make-powerlevel10k-slow )
1. [Are there configuration options that make Powerlevel10k slow? ](#are-there-configuration-options-that-make-powerlevel10k-slow )
1. [Is Powerlevel10k fast to load? ](#is-powerlevel10k-fast-to-load )
1. [Is Powerlevel10k fast to load? ](#is-powerlevel10k-fast-to-load )
1. [Does Powerlevel10k always render exactly the same prompt as Powerlevel9k given the same config? ](#does-powerlevel10k-always-render-exactly-the-same-prompt-as-powerlevel9k-given-the-same-config )
1. [Does Powerlevel10k always render exactly the same prompt as Powerlevel9k given the same config? ](#does-powerlevel10k-always-render-exactly-the-same-prompt-as-powerlevel9k-given-the-same-config )
1. [Why do I get extra spaces in prompt when I use my Powerlevel9k config with Powerlevel10k? ](#why-do-i-get-extra-spaces-in-prompt-when-i-use-my-powerlevel9k-config-with-powerlevel10k )
1. [Is there an AUR package for Powerlevel10k? ](#is-there-an-aur-package-for-powerlevel10k )
1. [Is there an AUR package for Powerlevel10k? ](#is-there-an-aur-package-for-powerlevel10k )
1. [I cannot make Powerlevel10k work with my plugin manager. Help! ](#i-cannot-make-powerlevel10k-work-with-my-plugin-manager-help )
1. [I cannot make Powerlevel10k work with my plugin manager. Help! ](#i-cannot-make-powerlevel10k-work-with-my-plugin-manager-help )
1. [What is the minimum supported zsh version? ](#what-is-the-minimum-supported-zsh-version )
1. [What is the minimum supported zsh version? ](#what-is-the-minimum-supported-zsh-version )
romkatv
5 years ago