@ -339,7 +339,7 @@ prompt_background_jobs() {
prompt_battery() {
# The battery can have four different states - default to 'unknown'.
local current_state="unknown"
local current_state='unknown'
typeset -AH battery_states
battery_states=(
'low' 'red'
@ -350,43 +350,37 @@ prompt_battery() {
# Set default values if the user did not configure them
set_default POWERLEVEL9K_BATTERY_LOW_THRESHOLD 10
if [[ $OS =~ OSX && -f /usr/sbin/ioreg && -x /usr/sbin/ioreg ]]; then
# Pre-Grep as much information as possible to save some memory and
# avoid pollution of the xtrace output.
local raw_data="$(ioreg -n AppleSmartBattery | grep -E "MaxCapacity|TimeRemaining|CurrentCapacity|ExternalConnected|IsCharging")"
if [[ $OS =~ OSX && -f /usr/bin/pmset && -x /usr/bin/pmset ]]; then
# obtain battery information from system
local raw_data="$(pmset -g batt | awk 'FNR==2{print}')"
# return if there is no battery on system
[[ -z $(echo $raw_data | grep MaxCapacity) ]] && return
# Convert time remaining from minutes to hours:minutes date string
local time_remaining=$(echo $raw_data | grep TimeRemaining | awk '{ print $5 }')
if [[ -n $time_remaining ]]; then
# this value is set to a very high number when the system is calculating
[[ $time_remaining -gt 10000 ]] && local tstring="..." || local tstring=${(f)$(/bin/date -u -r $(($time_remaining * 60)) +%k:%M)}
fi
[[ -z $(echo $raw_data | grep "InternalBattery") ]] && return
# Get charge values
local max_capacity=$(echo $raw_data | grep MaxCapacity | awk '{ print $5 }')
local current_capacity=$(echo $raw_data | grep CurrentCapacity | awk '{ print $5 }')
# Time remaining on battery operation (charging/discharging)
local tstring=$(echo $raw_data | awk -F ';' '{print $3}' | awk '{print $1}')
# If time has not been calculated by system yet
[[ $tstring =~ '(\(no|not)' ]] && tstring="..."
if [[ -n "$max_capacity" && -n "$current_capacity" ]]; then
typeset -i 10 bat_percent
bat_percent=$(( (current_capacity * 100) / max_capacity ))
fi
# percent of battery charged
typeset -i 10 bat_percent
bat_percent=$(echo $raw_data | grep -o '[0-9]*%' | sed 's/%//')
local remain=""
# Logic for string output
if [[ $(echo $raw_data | grep ExternalConnected | awk '{ print $5 }') =~ "Yes" ]]; the n
# Battery is charging
if [[ $(echo $raw_data | grep IsCharging | awk '{ print $5 }') =~ "Yes" ]]; then
case $(echo $raw_data | awk -F ';' '{print $2}' | awk '{$1=$1};1') i n
# for a short time after attaching power, status will be 'AC attached;'
'charging'|'finishing charge'|'AC attached')
current_state="charging"
remain=" ($tstring)"
else
;;
'discharging')
[[ $bat_percent -lt $POWERLEVEL9K_BATTERY_LOW_THRESHOLD ]] && current_state="low" || current_state="disconnected"
remain=" ($tstring)"
;;
*)
current_state="charged"
fi
else
[[ $bat_percent -lt $POWERLEVEL9K_BATTERY_LOW_THRESHOLD ]] && current_state="low" || current_state="disconnected"
remain=" ($tstring)"
fi
;;
esac
fi
if [[ $OS =~ Linux ]]; then
@ -397,20 +391,22 @@ prompt_battery() {
# Return if no battery found
[[ -z $bat ]] && return
[[ $(cat $bat/capacity) -gt 100 ]] && local bat_percent=100 || local bat_percent=$(cat $bat/capacity)
[[ $(cat $bat/status) =~ Charging ]] && local connected=true
[[ $(cat $bat/status) =~ Charging && $bat_percent =~ 100 ]] && current_state="charged"
[[ $(cat $bat/status) =~ Charging && $bat_percent -lt 100 ]] && current_state="charging"
local capacity=$(cat $bat/capacity)
local battery_status=$(cat $bat/status)
[[ $capacity -gt 100 ]] && local bat_percent=100 || local bat_percent=$capacity
[[ $battery_status =~ Charging || $battery_status =~ Full ]] && local connected=true
if [[ -z $connected ]]; then
[[ $bat_percent -lt $POWERLEVEL9K_BATTERY_LOW_THRESHOLD ]] && current_state="low" || current_state="disconnected"
else
[[ $bat_percent =~ 100 ]] && current_state="charged"
[[ $bat_percent -lt 100 ]] && current_state="charging"
fi
if [[ -f /usr/bin/acpi ]]; then
local time_remaining=$(acpi | awk '{ print $5 }')
if [[ $time_remaining =~ rate ]]; then
local tstring="..."
elif [[ $time_remaining =~ "[[:digit:]]+" ]]; then
local tstring=${(f)$(date -u -d "$(echo $time_remaining)" +%k:%M)}
local tstring=${(f)$(date -u -d "$(echo $time_remaining)" +%k:%M 2> /dev/null )}
fi
fi
[[ -n $tstring ]] && local remain=" ($tstring)"
@ -431,15 +427,89 @@ prompt_battery() {
fi
}
prompt_public_ip() {
# set default values for segment
set_default POWERLEVEL9K_PUBLIC_IP_TIMEOUT "300"
set_default POWERLEVEL9K_PUBLIC_IP_NONE ""
set_default POWERLEVEL9K_PUBLIC_IP_FILE "/tmp/p9k_public_ip"
set_default POWERLEVEL9K_PUBLIC_IP_HOST "http://ident.me"
# Do we need a fresh IP?
local refresh_ip=false
if [[ -f $POWERLEVEL9K_PUBLIC_IP_FILE ]]; then
typeset -i timediff
# if saved IP is more than
timediff=$(($(date +%s) - $(date -r $POWERLEVEL9K_PUBLIC_IP_FILE +%s)))
[[ $timediff -gt $POWERLEVEL9K_PUBLIC_IP_TIMEOUT ]] && refresh_ip=true
# If tmp file is empty get a fresh IP
[[ -z $(cat $POWERLEVEL9K_PUBLIC_IP_FILE) ]] && refresh_ip=true
[[ -n $POWERLEVEL9K_PUBLIC_IP_NONE ]] && [[ $(cat $POWERLEVEL9K_PUBLIC_IP_FILE) =~ "$POWERLEVEL9K_PUBLIC_IP_NONE" ]] && refresh_ip=true
else
touch $POWERLEVEL9K_PUBLIC_IP_FILE && refresh_ip=true
fi
# grab a fresh IP if needed
if [[ $refresh_ip =~ true && -w $POWERLEVEL9K_PUBLIC_IP_FILE ]]; then
# if method specified, don't use fallback methods
if [[ -n $POWERLEVEL9K_PUBLIC_IP_METHOD ]] && [[ $POWERLEVEL9K_PUBLIC_IP_METHOD =~ 'wget|curl|dig' ]]; then
local method=$POWERLEVEL9K_PUBLIC_IP_METHOD
fi
if [[ -n $method ]]; then
case $method in
'dig')
if type -p dig >/dev/null; then
fresh_ip="$(dig +time=1 +tries=1 +short myip.opendns.com @resolver1.opendns.com 2> /dev/null)"
[[ "$fresh_ip" =~ ^\; ]] && unset fresh_ip
fi
;;
'curl')
if [[ -z "$fresh_ip" ]] && type -p curl >/dev/null; then
fresh_ip="$(curl --max-time 10 -w '\n' "$POWERLEVEL9K_PUBLIC_IP_HOST" 2> /dev/null)"
fi
;;
'wget')
if [[ -z "$fresh_ip" ]] && type -p wget >/dev/null; then
fresh_ip="$(wget -T 10 -qO- "$POWERLEVEL9K_PUBLIC_IP_HOST" 2> /dev/null)"
fi
;;
esac
else
if type -p dig >/dev/null; then
fresh_ip="$(dig +time=1 +tries=1 +short myip.opendns.com @resolver1.opendns.com 2> /dev/null)"
[[ "$fresh_ip" =~ ^\; ]] && unset fresh_ip
fi
if [[ -z "$fresh_ip" ]] && type -p curl >/dev/null; then
fresh_ip="$(curl --max-time 10 -w '\n' "$POWERLEVEL9K_PUBLIC_IP_HOST" 2> /dev/null)"
fi
if [[ -z "$fresh_ip" ]] && type -p wget >/dev/null; then
fresh_ip="$(wget -T 10 -qO- "$POWERLEVEL9K_PUBLIC_IP_HOST" 2> /dev/null)"
fi
fi
# write IP to tmp file or clear tmp file if an IP was not retrieved
[[ -n $fresh_ip ]] && echo $fresh_ip > $POWERLEVEL9K_PUBLIC_IP_FILE || echo $POWERLEVEL9K_PUBLIC_IP_NONE > $POWERLEVEL9K_PUBLIC_IP_FILE
fi
# read public IP saved to tmp file
local public_ip=$(cat $POWERLEVEL9K_PUBLIC_IP_FILE)
if [[ -n $public_ip ]]; then
$1_prompt_segment "$0" "$2" "$DEFAULT_COLOR" "$DEFAULT_COLOR_INVERTED" "${public_ip}" 'PUBLIC_IP_ICON'
fi
}
# Context: user@hostname (who am I and where am I)
# Note that if $DEFAULT_USER is not set, this prompt segment will always print
prompt_context() {
set_default POWERLEVEL9K_CONTEXT_HOST_DEPTH "%m"
if [[ "$USER" != "$DEFAULT_USER" || -n "$SSH_CLIENT" ]]; then
if [[ $(print -P "%#") == '#' ]]; then
# Shell runs as root
"$1_prompt_segment" "$0_ROOT" "$2" "$DEFAULT_COLOR" "yellow" "$USER@%m"
"$1_prompt_segment" "$0_ROOT" "$2" "$DEFAULT_COLOR" "yellow" "$USER@$POWERLEVEL9K_CONTEXT_HOST_DEPTH "
else
"$1_prompt_segment" "$0_DEFAULT" "$2" "$DEFAULT_COLOR" "011" "$USER@%m"
"$1_prompt_segment" "$0_DEFAULT" "$2" "$DEFAULT_COLOR" "011" "$USER@$POWERLEVEL9K_CONTEXT_HOST_DEPTH "
fi
fi
}
@ -547,6 +617,26 @@ prompt_history() {
"$1_prompt_segment" "$0" "$2" "244" "$DEFAULT_COLOR" '%h'
}
# Detection for virtualization (systemd based systems only)
prompt_detect_virt() {
if ! command -v systemd-detect-virt;then
return
fi
local virt=$(systemd-detect-virt)
local color="yellow"
if [[ "$virt" == "none" ]]; then
if [[ "$(ls -di / | grep -o 2)" != "2" ]]; then
virt="chroot"
"$1_prompt_segment" "$0" "$2" "$color" "$DEFAULT_COLOR" "$virt"
else
;
fi
else
"$1_prompt_segment" "$0" "$2" "$color" "$DEFAULT_COLOR" "$virt"
fi
}
prompt_icons_test() {
for key in ${(@k)icons}; do
# The lower color spectrum in ZSH makes big steps. Choosing
@ -1057,7 +1147,7 @@ $(print_icon 'MULTILINE_SECOND_PROMPT_PREFIX')"
fi
}
powerlevel9k_init () {
prompt_powerlevel9k_setup () {
# Display a warning if the terminal does not support 256 colors
local term_colors
term_colors=$(echotc Co)
@ -1109,4 +1199,5 @@ powerlevel9k_init() {
add-zsh-hook precmd powerlevel9k_prepare_prompts
}
powerlevel9k_init "$@"
prompt_powerlevel9k_setup "$@"
Keith Miyake
8 years ago