diff --git a/config/p10k-classic.zsh b/config/p10k-classic.zsh
index 10c58094..421e5df9 100644
--- a/config/p10k-classic.zsh
+++ b/config/p10k-classic.zsh
@@ -455,20 +455,20 @@
   # it will signify error by turning red.
   typeset -g POWERLEVEL9K_STATUS_ERROR=true
   typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=160
-  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='↵'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='✘'
 
   # Status when the last command was terminated by a signal.
   typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
   typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=160
   # Use terse signal names: "INT" instead of "SIGINT(2)".
   typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
-  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='↵'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='✘'
 
   # Status when some part of a pipe command fails and the overall exit status is also non-zero.
   # It may look like this: 1|0.
   typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
   typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=160
-  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='↵'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='✘'
 
   ###################[ command_execution_time: duration of the last command ]###################
   # Show duration of the last command if takes longer than this many seconds.
diff --git a/config/p10k-lean.zsh b/config/p10k-lean.zsh
index 0e0b1c2a..e9b76643 100644
--- a/config/p10k-lean.zsh
+++ b/config/p10k-lean.zsh
@@ -448,20 +448,20 @@
   # it will signify error by turning red.
   typeset -g POWERLEVEL9K_STATUS_ERROR=false
   typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=160
-  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='↵'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='✘'
 
   # Status when the last command was terminated by a signal.
   typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
   typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=160
   # Use terse signal names: "INT" instead of "SIGINT(2)".
   typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
-  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='↵'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='✘'
 
   # Status when some part of a pipe command fails and the overall exit status is also non-zero.
   # It may look like this: 1|0.
   typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
   typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=160
-  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='↵'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='✘'
 
   ###################[ command_execution_time: duration of the last command ]###################
   # Show duration of the last command if takes longer than this many seconds.
diff --git a/config/p10k-rainbow.zsh b/config/p10k-rainbow.zsh
index fddefbb2..af3bbb22 100644
--- a/config/p10k-rainbow.zsh
+++ b/config/p10k-rainbow.zsh
@@ -445,7 +445,7 @@
   # Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as
   # it will signify error by turning red.
   typeset -g POWERLEVEL9K_STATUS_ERROR=true
-  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='↵'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='✘'
   # typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=3
   # typeset -g POWERLEVEL9K_STATUS_ERROR_BACKGROUND=1
 
@@ -453,14 +453,14 @@
   typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
   # Use terse signal names: "INT" instead of "SIGINT(2)".
   typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
-  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='↵'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='✘'
   # typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=3
   # typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_BACKGROUND=1
 
   # Status when some part of a pipe command fails and the overall exit status is also non-zero.
   # It may look like this: 1|0.
   typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
-  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='↵'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='✘'
   # typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=3
   # typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_BACKGROUND=1
 
diff --git a/internal/wizard.zsh b/internal/wizard.zsh
index 1eed65e0..15b2eab7 100755
--- a/internal/wizard.zsh
+++ b/internal/wizard.zsh
@@ -1443,15 +1443,13 @@ function generate_config() {
       sub VPN_IP_VISUAL_IDENTIFIER_EXPANSION "'\${P9K_VISUAL_IDENTIFIER}'"
     fi
 
+    if [[ $POWERLEVEL9K_MODE == compatible ]]; then
+      sub STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION "'х'"
+      sub STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION "'х'"
+      sub STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION "'х'"
+    fi
+
     if [[ $POWERLEVEL9K_MODE == (compatible|powerline) ]]; then
-      # Many fonts don't have the default icons.
-      [[ $POWERLEVEL9K_MODE == compatible ]] && local error='х' || local error='✘'
-      uncomment 'typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION'
-      sub STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION "'$error'"
-      uncomment 'typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION'
-      sub STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION "'$error'"
-      uncomment 'typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION'
-      sub STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION "'$error'"
       uncomment 'typeset -g POWERLEVEL9K_DIR_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION'
       sub DIR_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION "'∅'"
       uncomment 'typeset -g POWERLEVEL9K_TERRAFORM_VISUAL_IDENTIFIER_EXPANSION'